Epifanes Epoxy Primer, white, set 750 ml
€37.00
€30.58
Levertijd: 2-3 days
Two component anticorrosive primer based on epoxy resin and zinc phosphate. Rust, good filling and easy to sand.
application:
Filling base coat in a two-component system (adhesive), wood, fiberglass, or as anti-corrosion primer in a two component system on steel and aluminum, inside and outside, above and below the water line. Paintable with all Epifanes two-component products (Epifanes Poly-urethane primer and topcoat above the water line, Epifanes Epoxy HB Interim Coat Coat or below the waterline).
Sanding:
After 12 hours at 20 ° C.
Brush Application:
Epifanes Thinner D-601
Spray Processing:
Epifanes Thinner D-601
drying time:
After 12 hours at 18 ° C. Within 5 days without sanding
Pot life at 20 ° C:
For 2 hours at 18 ° C.
Recoat:
After 12 hours at 18 ° C.
Recoat with:
Epifanes Poly-urethane spar varnish Epifanes Epoxy HB Coat Interim Epifanes Epifanes Epoxy Coat Fillers
Mileage:
12 m2 / l @ 40 micron
Recommended dry film thickness:
40 micron
Recommended wet layer thickness:
80 microns
Mixing ratio in volume:
100 parts of base (A): 25 parts hardener (B)
Mix ratio by weight:
100 parts of base (A): 14 parts hardener (B)
Article number | P741 |
---|---|
Stock | In stock at supplier |
Levertijd | 2-3 days |
Manufacturer | Epifanes |
Write Your Own Review